+8801712-506181

Universal IC Programmer for PLC Unlock Service tool

Universal Programmer IC Programmer for PLC Unlock Service Like SupperPro, RT809H, Sofi SF8 Programmer for it need to good quality plcc socket as per ic design…

Programming Software: Download

RT809H is very good quality programmer for eeprom read/write data and bin file also viewer of hexadecimal and binary code.

Programming Software: Download

EEPROM Read/write plcc socket

Product Purchase link: Click

SUPERPRO-610P, Universal IC Chip Device Programmer for ARM9 32 bit MCU, EPROMs, Flashs, PLDs

SUPERPRO 610P, High-Speed Universal Programmer, USB 2.0 The SuperPro-610P is an universal production programmer equipped with ARM9 processor with a USB 2.0 interface. Based on the 48-pin ZIF socket it can program over 32000 differents components among EPROMs, EEPROMs, FLASHs memories, PLDs and microcontrollers. It can program low voltage components down to 1.2V. It doesn’t need any adapters for any SDIP packages. The programming is extremely fast based on the use of algorithm technology downloaded in the CPU of the programmer during the selection of a device. An optional ISP adapter permit to program components soldered on printed circuits or devices in special packages. The software runs under Windows 98/ME/NT/2000/XP/Windows7/Windows8 (32/64 bits). Updates can be download freely. Supported devices: EPROM, Paged EPROM, Parallel and Serial EEPROM, FPGA Configuration PROM, FLASH memory (NOR & NAND), BPROM, NVRAM, SPLD, CPLD, EPLD, Firmware HUB, Microcontroller Packages supported: DIP, SDIP, PLCC, JLCC, SOIC, QFP, TQFP, PQFP, VQFP, TSOP, SOP, TSOPII, PSOP, TSSOP, SON, EBGA, FBGA, VFBGA, uBGA, CSP, SCSP, and more Tests and Detects incorrect insertion of the device and defective pin protected against short circuits and over-voltages Computer interface with USB 2.0 AC Power Adapter: AC input 90V to 250V, 50/60Hz, DC output 12V/2A; power: 15W Dimensions: 178 x 130 x 40 mm, Weight: 0.8kg Kit Contents Programmer with 48-pins ZIF socket Power Adaptor 90-260Vac to 12Vdc USB-B to USB-A cable Software on CD-ROM User manual in English and French PC Based Programmers

Product Information

Accessory Type :Universal IC Chip Device Programmer
For Use With :ARM9 32 bit MCU, EPROMs, Flashs, PLDs
Rohs :RoHS Certificate of Compliance
Interface :USB 2.0
Programmer Name :SUPERPRO 610P
Memory Type Programmed :EEPROM, EPROM, FLASH

DEVICES LIST SUPERPRO-610P

(Universal programmer with ZIF48pins drivers)

Push “CTRL + F” keys to find a component

Universal programmer SuperPro-610P

Total manufacturers : 238

Total devices : 33677

Revision 1652

Explanation to read a device: Click Supported IC

More from the blog

Advance level PLC Unlock Guidance based on experience Engineering

The Advance level PLC Unlock Guidance based on experience Engineering which is expert of BIN file analyzes and converting HEX file to get PLC...

Step-by-Step Guide How to Connect a Servo Drive to a PLC

A servo drive is a type of motor controller that is use to control the speed and position of a servo motor. A PLC,...

Getting Started with Programmable Logic Controllers A Beginner’s Guide

The programmable Logic Controllers Beginner's Guide, or PLCs for short, are computerize systems use in industrial and manufacturing applications to automate processes. PLCs are...

17-Step Checklist for Repairing a Variable Frequency Drive (VFD)

In conclusion, A Variable Frequency Drive (VFD) is an important component of many industrial applications. However, and it is critical to keep them running...